STYLPRO Makeup Brush Cleaner & Dryer Original

"Make-up brushes are a breeding ground for bacteria, which can cause blemishes, redness and dry patches if they are not cleaned. 44% of women have never washed their make-up brushes! Professionals recommend cleaning make-up brushes once a week. However, conventional cleaning methods are very laborious and time-consuming. The make-up brushes do not dry properly and cannot be used for up to 24 hours. STYLPRO cleans and dries make-up brushes in seconds.APPLICATION:Please read all instructions beforehand and keep them for future use.THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. USE IT ONLY FOR ITS INTENDED PURPOSE AS DESCRIBED IN THESE INSTRUCTIONS.1. select the brush and pay attention to whether you want to remove water-soluble or non-water-soluble make-up from the brush. 2. select the (E) CUP best suited to the brush to be cleaned and press the brush into it until it is firmly seated and straight. Remove the (E) BOWL and the brush from the (F) BOTTOM. 3. push the (C) spindle into the square opening on the underside of the (E) BOWL. Make sure that the StylPro appliance is firmly and straightly connected to the (E) CUP and the brush. Correct the position of the brush if necessary. Any slight tilt will affect the cleaning and drying ability of the StylPro and may cause rattling during use. 4. (B) Fill the tray: A. For water-soluble makeup (e.g. blush, bronzer, loose powder), add a small amount (4ml/0.14floz) of your favorite antibacterial liquid soap to the (B) TRAY. Please consult your brush manufacturer for the best possible cleaner. Fill the bowl with water until the water level is half the height of the bristles to be cleaned. If you are not sure whether the make-up is water-soluble, try this step first. If the brush is not completely clean, follow the instructions for non-water-soluble make-up. B. For non-water-soluble make-up (e.g. foundation), add 10-20ml (0.34-0.68floz) of StylPro Make-up Brush Cleanser (available separately at www.stylpro.co.uk) to the tray, depending on the brush size. Make sure that the level of the solution is less than half the height of the brush bristles to be cleaned. 5. gently move the brush up and down in the liquid and gently push the brush into the (B) bowl to open the bristles. Work the liquid into the bristles. Repeat the process for 5 seconds. To avoid damaging the brush, do not allow the metal sleeve to sink below the water/cleaner level. 6. after 5 seconds: Turn on the StylPro while gently pushing down on the brush in the (B) TRAY. Gently lift the StylPro - the brush will start to rotate rapidly, causing the liquid to spray upwards. Slowly move the brush up and down for 10 seconds, always keeping the brush below the cleaner level. If the brush is not straight at this point, it may start to wiggle from side to side and hit the (B) DISH. If this happens, loosen your grip and gently place a finger on the top of the StylPro. If this does not solve the problem, turn off the StylPro and refer to the """"""""Questions... ...