BERNSTEIN BERN 9 240 ESD - PCB holder SPANNFIX VARIO, ESD, with clamp and cable

With the SPANNFIX VARIO, PCBs / printed circuit boards up to a length of 270 mm can be clamped. The steplessly adjustable ball allows the PCB to be positioned and held securely in all directions.

Quick turning of the PCBs / boards is possible thanks to the adapter. Very helpful as a third hand when soldering or assembling, useful clamping and holding device with quick release mechanism. The BERNSTEIN ball joint holder has a continuously adjustable - 360° rotatable and +/- 45° inclinable - ball, with external thread for all kinds of devices and instruments. These can thus be tilted in any direction, this allows fast, individual and mobile alignment in any position. With a simple lever movement, the ball head is released in the cone socket, individually aligned and clamped. Without any locking, the ball clamp provides an extremely strong hold. The adjustment screw on the lower seat of the ball allows the ball movement to be adjusted from loose to very tight.

• precision ball joint 360° rotatable
• infinitely adjustable quick clamping
• quality product 100% Made in Germany
• stable mounting frame with adjustable and rotatable holders
• with spring suspension for sensitive boards
• Angle adapter for greater inclination
• board holder adjustable from 25 mm to 270 mm
• for clamping, for workbenches with max. table top thickness of 80 mm
• inclination angle +/- 45
• incl. ESD grounding cable 1 MOhm, length 1.8 m for connection to an EBP / Earth Bonding Point
• Materials steel, plastic
• Cast aluminum with ESD powder coating black
• conductive 10^7 to 10^8 Ohm
• Orientation dimensions approx 360 x 280 x 180 mm
• Weight 1330 g
• connection thread M12 x 1,5 mm
• maximum torque: ball-Ø 40 mm approx 24 Nm, ball-Ø 60 mm approx 100 Nm
• Holding forces of the ball at the height of the threaded pin: ball-Ø 40 mm approx 45 kg (441N), ball-Ø 60 mm approx140 kg (1,372N)

Ball joint combination consisting of:

• 9-251 ESD ball joint foot part SPANNFIX for clamping (threaded pin 20 mm)
• 9-253 ESD board holder for screwing on (M12x1.5)
• 9-255 ESD Angle adapter SPANNFIX for screwing on (M12x1.5)
• 9-343-1 ESD grounding cable 1 MOhm, 1800 mm 2DK 10/10

...