FRANZIS-VERLAG IS 9-631-67122-6 - Make it easy - Maker KIT Learn to solder

With this Maker Kit you will learn step by step how to solder correctly - an elementary technique for every Maker and the basis for successful projects of your own.
The detailed manual clearly describes soldering practice and electronics knowledge.

• learn error-free soldering
• solder eight real projects
• basics of electronics
• functional tests and measurement techniques
• components included

Already soldered properly today?
With this Maker Kit you will learn step by step how to solder correctly - an elementary technique for every Maker and the basis for successful projects of your own.
In the detailed manual, soldering practice and electronics knowledge are clearly described. In this way, you will learn important basics of electronics almost by accident - from circuitry to functional tests and measurement techniques. The 90-page manual provides beginners with everything they need to know for their first soldering projects.
Please note that soldering iron and solder are not part of the Maker Kit, they have to be purchased additionally.
So, soldering iron on and let's go!

These are the projects you will build
• LED light with switch
• transistor alarm system
• temperature sensor
• Light sensor
• Soft turn signal
• Eternal turn signal
• LED voltage transformer
• Single transistor flasher

The components at a glance
• 1x circuit board 70 mm x 100 mm with six partitions
• 1x battery compartment 1.5 V
• 1x battery clip 9 V
• 1x insulated switch wire 1 m
• 10x NPN transistor BC547B
• 2x PNP transistor BC557B
• 2x disk capacitor 100 nF
• 5x electrolytic capacitor 22 µF
• 2x resistor 1 kO
• 5x resistor 10 kO
• 5x resistor 27 kO
• 5x resistor 100 kO
• 2x resistor 10 MO
• 2x LED red 5 mm
• 2x LED yellow 5 mm
• 2x LED green 5 mm
• 2x LED white 5 mm

Notes
• additionally required: soldering iron and solder, 1 x 1.5 V AA batteries, 1 x 9 V block battery
• not suitable for children under 14 years of age ...