BOSCH SMART HOME BSH 8750002778 - Wall switch, for smart actuators

BOSCH Smart Home wall switch

• Can be used with light/roller shutter control II, relay and dimmer
• Saves up to 15 mm compared to commercially available solutions - can be used from an installation depth of 35 mm
• Compatible with common switch series from Busch-Jaeger, Gira, Jung - installation behind compatible existing switch series possible
• Double push-button to address both inputs of the light/roller shutter control or for dimmers and relays in push-button mode (only one input per device available)
• Frame 80 x 80 mm, rocker 55 x 55 mm

No space in the appliance box? No problem!
Your smart actuator doesn't fit into the appliance box in the wall behind your existing switch? No problem: The Bosch Smart Home wall switch is the ideal accessory for installing your smart actuators from Bosch in the appliance box to save space - from an installation depth of at least 35 mm.

Versatile use
The switch enables space-saving installation of Bosch Smart Home actuators. This makes it easier to fit light/shutter control II, relays or dimmers into your appliance box.

Space-saving
The extra-flat design saves up to 15 mm in depth compared to conventional switches.

Flexible use
The Smart Home wall switch can be integrated into compatible existing switch series or installed with the supplied rocker switch and frame.


Flexible installation options
The wall switch for smart actuators is a set consisting of switch, frame, frame holder and rocker. Depending on the situation, you can install the smart home wall switch completely or use only parts:

Option 1: Install invisibly
Do you want to stay true to your existing frames and rockers so that they are uniform throughout your home?
The Bosch Smart Home wall switch is compatible with standard switch series from Busch-Jaeger, Gira and Jung thanks to the integrated adapter*.
In this case, you only use the ''inner workings'', the switch, and install it invisibly behind your existing equipment. Thanks to the extra-flat design of the wall switch, you save up to 15 mm when installing your smart actuator - without any visible external changes.
Important:

• Only for compatible switch series
• Can be used for single and multiple frames
• No additional adapter required
• Adaptations to existing rocker may be necessary
• Only possible for single rockers (2-gang rockers must be replaced by single rockers from the same switch series)

Option 2: Use with standard 55 mm frame
The rocker included in the scope of delivery matches the standard 55 mm frame size and the wall switch can therefore be combined with many other frames from brand manufacturers. This also gives you the option of installing the wall switch in multiple frames, which... ...