ABB EN20-20N-06 - Installation contactor 20 A, 2 NO/0 NC, 230 V AC/DC

EN20..N 2-pin contactors with a width of 18 mm control 1-phase loads up to 20 A and are available in different contact assignments and coil voltages. They switch electric heaters, water heaters, motors for pumps, ventilation and other drives as well as lighting. Thanks to an integrated coil protective circuit, they work with both AC and DC control voltages. The devices are therefore absolutely hum-free and quiet when switching. EN20..Ns have a built-in switching box that allows you to choose between three operating modes: Manually switched off (even when the control signal is present), automatic mode (normal contactor function) and manually switched on with a return to automatic mode when the coil is next supplied with voltage. This offers numerous advantages: For example, during commissioning, a function test of the load circuit can be carried out even without a control signal, and if the control signal is present, the load circuit can be switched off quickly and easily at any time.
EN20..Ns have an installation design and comply with the household standard EN61095 and more, so they are particularly suitable for distributor installation. ...