D-LINK D111MPV2E - Switch, 10-Port, Gigabit Ethernet, PoE

10-port layer2 PoE Gigabit smart switch

• Intuitive management and enhanced security features
• 8 Gigabit TP ports with Power-over-Ethernet, as well as 2 fibreglass (SFP) combo slots
• Equipped with the D-link green technology
• Fanless design: works particularly energy efficiently and silently
• Automatic prioritisation of voice data by Auto Voice VLAN
• Quality of service and bandwidth control in 64 Kbit/s steps
• Cable diagnostics to check the copper wires for malfunctions
• SmartConsole utility for the general configuration of multiple D-Link smart switches

The Web Smart managed gigabit switch DGS-1210-10P supports many features normally found only in high-end switches. It guarantees a maximum degree of control, service and security but without the complexity of an enterprise switch. Due to the very low administrative overhead, it is ideal for use in small and medium-sized businesses. In addition, the smart switch is silent thanks to a fanless design and so it's ideal for open office environments.

Comprehensive security functions in the network
The DGS-1210-10P features extended security settings. Thus the D-Link SafeGuard Engine intervenes when individual network components overload the switch CPU with large amounts of data due to a viral attack. The Access Control List specifies which user may use which services and files and authenticates these users using the IEEE 802.1X standard. For added security, the DHCP Server Screening* ensures, for example - the switch detects its IP address from the DHCP request of the client and the corresponding response of the server and the port automatically assigns this to the MAC address belonging to the port.

High functionality thanks to bandwidth control and QoS
The switch impresses with sophisticated QoS functions for the automatic prioritisation of digital data packets. For optimal voice quality for VoIP applications, the voice VLAN support ensures that the voice traffic is automatically moved to a VLAN with the highest priority. Bandwidth control also allows the network administrator to limit bandwidth for subordinate devices.

Network management made easy
With the SmartConsole Utility, additional D-link smart switches within the same layer2 segment are automatically detected. Basic configurations such as password changes and firmware upgrades are simplified and summarised by a clear start setup. The DGS-1210-10P supports management via TELNET basic CLI, SNMP and D-View 6.0, which are used for integrated monitoring and management of all critical network components, in addition to using the Web interface.

Flexible with Power-over-Ethernet (PoE)
With Power over Ethernet, outlets at the terminal devices can be done without. With cat. 5 network cabling, PoE-enabled terminal devices are supplied with power and data... ...