EXSYS EX1311-25V - USB 2.0 converter, A to RS-232, +5 V, pin 9, 1.8 m

• Interface: RS232 V.24 with +5 V on pin 9 of the connector
• FIFO buffer: 16C550 with 16 bytes
• I/O addresses and interrupt: assigned by the operating system
• Data bits: 7 and 8/stop bits: 1, 1.5, 2/parity: none, even, odd, space, mark
• Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• LED display for RX and TX
• Power supply from the USB bus (bus power)
• Replaceable screws with hexagonal lock nuts
• Chip set: FTDI

The USB 2.0 to RS-232 cable with A-connector provides a serial RS-232 High Performance UART 16C550 output. This output supports the external voltage of +5V, especially on pin 9 of the connector. The connector was developed to add one additional serial output for a PC, small workstation or server via the USB 1.1, 2.0 or 3.2 Gen 1 bus. The simple installation means that the computer does not have to be opened and the EX-1311-2-5V can be installed during operation. Two lock nuts are supplied, which can be easily replaced with the thumb screws if the cable to be connected has screws. ...