EXSYS EX-1163HMS - USB 2.0 4 port industrial hub, 15kV ESD, Din-Rail

The industrial-grade EX-1163HMS USB hub with four USB 2.0 outputs can be installed on the wall or on a mounting rail. It is connected to a computer or server using the USB 2.0 cable supplied.

It has 15KV ESD overvoltage protection for all four USB 2.0 downstream ports. Power is supplied either via USB (bus power) or the 3-pin terminal strip connection (7-24 VDC). Two internal jumpers can be used to individually configure the power output at the downstream ports according to your own requirements.

The EX-1163HMS meets the special requirements of industrial applications and is very compact and robust.

• USB 2.0 HUB with four downstream ports
• 15 kV ESD overvoltage protection for all 4 ports
• Power supply +7 to +24 VDC via the terminal block
• Power supply optionally also from the USB bus +5 V (bus power)
• Individual configuration of the power output at the downstream ports possible
• Automatic detection of input polarity at the power terminal block
• Automatic detection of the data transfer rate of connected peripheral devices
• easy installation thanks to the DIN rail bracket supplied
• 500 mA current on all 4 ports
• Compact industrial design in metal housing
• 5x status LED
• Chipset: Terminus FE 2.1

Two internal jumpers for individual control of the operating mode (data and current):

• Jumper Bus Power:
  
  • ENA = Bus Power operation possible
  • DIS = Operation only possible with power supply unit (Self Power)
• Jumper Host control:
  
  • ON = Power supply independent of the host PC
  • HOST = Power supply only when host PC is switched on

Scope of delivery:
EX-1163HMS, USB 2.0 cable 2.0 m, DIN rail kit, manual ...