EFB-ELEKTRONIK EFB EC020200131 - Patch cord, Cat.7 raw cable, S/FTP PiMF, 50 m, gray

RJ45 patch cable with Cat.7 raw cable, S/FTP PIMF network cable, LAN DSL

• S/FTP shielded
• 1:1 pin assignment
• Snap-in protection
• Halogen free
• IP20 suitable

Cat.7 raw cable: more data through the wire
The Cat.7 network cable is practically an upgrade to the Cat.6A patch cable: The Cat.6A network cable is equipped with a Cat.7 raw cable from EFB-Elektronik.
As a result, it is designed for an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s.
In contrast, the Cat.6A raw cable has an operating frequency of 500 MHz.
Due to the increased frequency, the Cat.7 patch cable with CAT.6a connector can handle significantly more data traffic.
The halogen-free outer jacket of the Cat.7 cable provides additional safety.
The patch cords are produced with a Cat.7 raw cable to ensure the highest possible performance.
They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays, computers or any of the many new IoT devices.
Cat.7 network cable shows its optimal strength when used in conjunction with EFB-Elektronik data outlets and EFB-Elektronik patch panels, as well as EFB-Elektronik keystones.
These products can easily cope with the high standards of the high-speed environment that the use of Cat.7 network cables entails.
Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably.

Cat.7 network cable with gold contacts in CAT.6A RJ45 connector
Each Cat.7 cable pair within the Cat.7 patch cables with CAT.6A connectors is individually shielded in metal foil (PIMF).
This makes these cables particularly suitable for interference-free data transmission.
Due to its kink and jack protection, the high-quality, shielded Cat.6A RJ45 plug with gold-plated contacts can survive a high number of mating cycles undamaged.
Your end devices will stay connected to the Internet even if they are moved unintentionally: These Cat.7 cables with CAT.6A connectors can only be disconnected from the device by pressing the latching tab on the RJ45 connector.
The Cat.7 network cables are downward compatible, so they can also be used in Cat.5 or Cat.6 networks and speeds of up to 10 Gbit can be achieved. ...