ODROID M2 8GB - Odroid M2, 4x 2.3 GHz, 8 GB RAM

The ODROID-M2 is a cost-effective single-board computer with an ARM Cortex-A76 quad-core and an ARM Cortex-A55 quad-core, which offers high energy efficiency and a slim design. It is equipped with numerous inputs and outputs and is suitable for a wide range of applications.

• ARM Cortex-A76 and Cortex-A55 Octa-Core architecture
• Energy-efficient design and compact form factor
• integrated 64 GB eMMC memory for fast data processing
• 8 GB LPDDR5 RAM for demanding applications
• multiple input and output connections for expandability

The ODROID-M2 impresses with its high performance and energy efficiency. With its ARM Cortex-A76 and Cortex-A55 processors, it offers an optimum combination of computing power and low power consumption. The integrated 64 GB eMMC memory enables fast data transfers and together with 8 GB LPDDR5 RAM, the device is suitable for memory-intensive applications. The slim design and numerous connection options make the ODROID-M2 a flexible solution for various application scenarios.

Technical data

• Processor: Rockchip RK3588S2
• Quad-Core Cortex-A76 (2.3 GHz +/- 0.1 GHz)
• Quad-Core Cortex-A55 (1.8 GHz)
• ARMv8-A architecture with neon and crypto extensions
• Mali-G610 GPU MP4 (1 GHz)
• Memory architecture:
  
  • 64 KB L1 instruction cache, 64 KB L1 data cache, 512 KB L2 cache, shared by Cortex-A76 processor
  • 32 KB L1 instruction cache, 32 KB L1 data cache, 128 KB L2 cache, shared by Cortex-A55 processor
  • L3 data cache: 3 MB, shared by 8 processors
• NPU: 6 TOPS@INT8, integrated AI accelerator RKNN NPU
• Memory: LPDDR5 8 with 64-bit bus width
• Memory:
  
  • 1 x 64 GB eMMC (soldered on the board)
  • 1 x MicroSD slot (UHS-I SDR104)
  • Boot priority selectable between eMMC and microSD via slide switch
  • 1 x NVMe M.2 SSD (PCIe 2.1 x 1 lane)
• Network: 1 x GbE port (RJ45, supports 10/100/1000 Mbps)
  
  • Green LED: Flashing for data traffic with 100 Mbps connection
  • Yellow LED: Flashing for data traffic with 1000 Mbps connection
• Video output:
  
  • 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
  • 1 x MIPI DSI interface (30-pin connector, different from the 31-pin connector of the ODROID-M1)
  • 1 x DP (via USB Type-C port)
• External I/O:
  
  • 1 x USB 2.0 host port
  • 1 x USB 3.0 host port
  • 1 x USB 3.0 Type-C (data communication and DP Alt-Mode, no power source/sink)
  • 1 x debug serial console (UART)
  • 1 x 40 pin GPIO and 1 x 14 pin GPIO
• Real-time clock (RTC):
  
  • Onboard low-power PCF8536 RTC chip
  • CR2032 RTC backup battery holder, keeps time and date for up to 10 years without... ...