ODROID M2 16GB - Odroid M2, 4x 2.3 GHz, 16 GB RAM

The ODROID-M2 is a cost-effective single-board computer with an ARM Cortex-A76 quad-core and an ARM Cortex-A55 quad-core, which offers high energy efficiency and a slim design. It is equipped with numerous inputs and outputs and is suitable for a wide range of applications.

• ARM Cortex-A76 and Cortex-A55 Octa-Core architecture
• Energy-efficient design and compact form factor
• integrated 64 GB eMMC memory for fast data processing
• 16 GB LPDDR5 RAM for demanding applications
• multiple input and output connections for expandability

The ODROID-M2 impresses with its high performance and energy efficiency. With its ARM Cortex-A76 and Cortex-A55 processors, it offers an optimum combination of computing power and low power consumption. The integrated 64 GB eMMC memory enables fast data transfers and together with 16 GB LPDDR5 RAM, the device is suitable for memory-intensive applications. The slim design and numerous connection options make the ODROID-M2 a flexible solution for various application scenarios.

Technical data

• Processor: Rockchip RK3588S2
• Quad-Core Cortex-A76 (2.3 GHz +/- 0.1 GHz)
• Quad-Core Cortex-A55 (1.8 GHz)
• ARMv8-A architecture with neon and crypto extensions
• Mali-G610 GPU MP4 (1 GHz)
• Memory architecture:
  
  • 64 KB L1 instruction cache, 64 KB L1 data cache, 512 KB L2 cache, shared by Cortex-A76 processor
  • 32 KB L1 instruction cache, 32 KB L1 data cache, 128 KB L2 cache, shared by Cortex-A55 processor
  • L3 data cache: 3 MB, shared by 8 processors
• NPU: 6 TOPS@INT8, integrated AI accelerator RKNN NPU
• Memory: LPDDR5 16 with 64-bit bus width
• Memory:
  
  • 1 x 64 GB eMMC (soldered on the board)
  • 1 x MicroSD slot (UHS-I SDR104)
  • Boot priority selectable between eMMC and microSD via slide switch
  • 1 x NVMe M.2 SSD (PCIe 2.1 x 1 lane)
• Network: 1 x GbE port (RJ45, supports 10/100/1000 Mbps)
  
  • Green LED: Flashing for data traffic with 100 Mbps connection
  • Yellow LED: Flashing for data traffic with 1000 Mbps connection
• Video output:
  
  • 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
  • 1 x MIPI DSI interface (30-pin connector, different from the 31-pin connector of the ODROID-M1)
  • 1 x DP (via USB Type-C port)
• External I/O:
  
  • 1 x USB 2.0 host port
  • 1 x USB 3.0 host port
  • 1 x USB 3.0 Type-C (data communication and DP Alt-Mode, no power source/sink)
  • 1 x debug serial console (UART)
  • 1 x 40 pin GPIO and 1 x 14 pin GPIO
• Real-time clock (RTC):
  
  • Onboard low-power PCF8536 RTC chip
  • CR2032 RTC backup battery holder, keeps time and date for up to 10 years... ...