APCSMT3000RMI2UC - Smart-UPS, 3000VA, LCD RM 2U, 230V

APC Smart-UPS 3000VA LCD RM 2U 230V with SmartConnect

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Output

• Output power capacity: 2.7kWatts / 3.0kVA
• Max Configurable Power (Watts): 2.7kWatts / 3.0kVA
• Nominal Output Voltage: 230V
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5%
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Other Output Voltages: 220, 240
• Topology: Line Interactive
• Waveform type: Sine wave
• Output Connections: (3) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup)
• Transfer Time: 6ms typical : 10ms maximum

Input

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: British BS1363A, IEC-320 C20, Schutzkontakt CEE 7/EU1-16P
• Cord Length: 2meters
• Input voltage range for main operations: 160 - 286V
• Input voltage adjustable range for mains operation: 151 - 302V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 3hour(s)
• Replacement Battery: RBC43
• Expected Battery Life (years): 3 - 5
• RBC Quantity: 1

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Available SmartSlot™ Interface Quantity: 1

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates... ...